Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

BM 2400 Remote

rated by 0 users
This post has 4 Replies | 2 Followers

Søren Mexico
Top 10 Contributor
Mexico City
Posts 6,411
OFFLINE
Bronze Member
Søren Mexico Posted: Tue, Feb 7 2012 3:32 PM

Got my Remote for the BM 2400, Funny failure, all the left side buttons works, I can change to channel 1,3 and select Phono and lover volume, but non of the right side controls work, I took it apart and cleaned it, but no difference. I will change the caps and see what happens, but the question is, is the failure in the remote or in the BM.

Collecting Vintage B&O is not a hobby, its a lifestyle.

Evan
Top 50 Contributor
USA
Posts 3,621
OFFLINE
Gold Member
Evan replied on Tue, Feb 7 2012 3:42 PM

Well, on the topic of diagnosing whether it is the remote or the BM, put your ear to the remote and check to see if it makes any noise when the buttons are pressed.

If the remote makes noise on all buttons, there is a problem in the BM. 

Beo4 'til I die!

Dillen
Top 10 Contributor
Copenhagen / Denmark
Posts 13,191
OFFLINE
Founder
Moderator
Dillen replied on Tue, Feb 7 2012 4:14 PM

Most likely in the Beomaster.
The received signals are grouped according to frequency in there and that corresponds to the left
and right buttons respectively.

Martin 

Søren Mexico
Top 10 Contributor
Mexico City
Posts 6,411
OFFLINE
Bronze Member

Dillen:

Most likely in the Beomaster.
The received signals are grouped according to frequency in there and that corresponds to the left
and right buttons respectively.

Martin 

As I'm still running my BM 2400 for testing, its still open, will try to figure this out with help of the schematics.

 

Collecting Vintage B&O is not a hobby, its a lifestyle.

Beobuddy
Top 25 Contributor
Utrecht, The Netherlands
Posts 3,972
OFFLINE
Founder
Beobuddy replied on Sun, Feb 12 2012 8:31 PM

And?

Already any progress?

My BM 2400 remote makes noises when you press on the aluminium buttons.

 

Page 1 of 1 (5 items) | RSS