ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
I've never been entirely happy with the picture quality since I bought the TV a couple of years ago. I suspected that the signal it's using is composite rather than RGB. So today I decided to disconnect pin 20 (composite IN) and hey presto no picture.
What do I need to do to ensure the TV uses RGB?
I have tried with several sources, STB, PVR, DVD, same result with each one.
Any thoughts very welcome - thanks.
Which socket are you using? V.Tape and AV automatically default to RGB when there but Decoder is not RGB enabled. I use the AV socket for the Sky box - I use a BV5, Avant and BV3 - all of which use the same basic chassis.
Peter
I feel such a plonker - thank you so much!
I fully understand you though - why isn't the decoder socket RGB? - which other socket would you logically use!!
To show my appreciation I would like to make a small donation to your favourite charity. Please let me know which that would be - many thanks.
I would suggest your local pub - a relaxing pint to soothe your nerves! It is a pleasure to share any small knowledge I have!
PubAid raises over £100M per year, their largest recipient is Help for Heroes. I have therefore made a small donation to H4H.
Thanks again, I really appreciate your help.