ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
couldn't find it here on the forum, hence:
what's the most convenient way to (occasionally!!) connect SCART-only video equipment to a SCART-less BeoVision 11 ?
btw: the AV-input is listed as "mini AV". Is this a nine-pin "mini DIN" ? would this be the one: (couldn't find much more than this one!!)
http://www.alibaba.com/product-detail/Scart-to-Mini-Din-Cable_2004055808.html
or is it just what we used to call an S-Video connection?
Rene
Hi Rene,
have a look at link should be the same as for the V1 which is discussed in that thread. I think the answers you'r after are in there.
You should buy the adapter from your dealer, I tried another one prior to asking the dealer, it turned out not to fit. Also the B&O adapter was less than €20
Good luck
//Goran
thanks Goran, I missed that one since I searched for SCART and BeoVision (11 / Avant)
so the short answer is "an 18 Euro scart-to-9-pin-DIN" sold by B&O dealers works perfectly to get analog AV into not only an BeoPlay V1 but also the BV11" (and I guess the new Avant).
So no need to (re)consider a SCART-to-HDMI converter ..... ? ( I read some disappointing stories about that obvious alternative solution).
Item number 6271217 for the scart male adapter (2 m) - 6271215 for the female (0.75 m).
MM
There is a tv - and there is a BV