Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

3000 5228 automatic arm selector issue

rated by 0 users
This post has 4 Replies | 0 Followers

Witchywoo
Not Ranked
Posts 4
OFFLINE
Bronze Member
Witchywoo Posted: Mon, Dec 28 2020 2:37 PM

Hi

please forgive me for not knowing the names of the parts. Complete newbie. Fixed a few problems already but can anyone tell me where the part sitting on top of the white cog goes? Pretty sure it’s not supposed to be on the top. Thanks. Trying to put a picture in from media but not working at present. Will keep trying.

 

I can't add the image which I have saved in the media section. It says nothing to list.  Are you able to view my image from the media section?

Dillen
Top 10 Contributor
Copenhagen / Denmark
Posts 13,191
OFFLINE
Founder
Moderator
Dillen replied on Mon, Dec 28 2020 3:10 PM

The white end goes under the (teflon on metal) friction plate on top of the deck (under the platter).

Martin 

solderon29
Top 150 Contributor
U.K.West Midlands
Posts 764
OFFLINE
Gold Member

I can't imagine how it escaped,but if you remove the white gear wheel you'll see where it slots into the chassis.

Make sure the tiny wire spring on the red relay arm does'nt fly off either,as they are a real trial to find after they shoot past your ear!

Nick

Witchywoo
Not Ranked
Posts 4
OFFLINE
Bronze Member
Witchywoo replied on Mon, Dec 28 2020 6:14 PM

Thank you.  I do not know the names of any of the parts and so can't work out what parts you are referring to. Can you describe which are which? Thanks 

Witchywoo
Not Ranked
Posts 4
OFFLINE
Bronze Member
Witchywoo replied on Mon, Dec 28 2020 6:15 PM

Thank you. Will see if I can work out how to remove it.

Page 1 of 1 (5 items) | RSS