Linksystem??

Hi!

Many years sinse I build A Linksystem :( My problem Is: Masterunit Beovision 7-55 3D-Bluray and Beomaster 5 in mainroom. Beovision 10-32 as Link in Bedroom. Beovision 7-40 Mk1 in studyroom. Beovision 6-26 in guestroom. MasterLink Cable connecting all rooms. Option 2 in mainroom and option 6 in every Linkroom. BUT!!! Nothing happens when I try to operate the 10-32 and try to start DVD. WHY????? Please help :)

 

DVD is a digital video signal which is not transferred over the RF link ( I assume you have defined the slave TVs as link systems ).

Audio is OK and old school analogue TVS but not digital.

Have you looked at the HDMI matrix ?

My thought´s to. My client Is totaly convinced that he had only the RF Cable in his old system beside the ML Cable and could look at DVD in his bedroom at A Link TV.

 

Gandiman65:

My thought´s to. My client Is totaly convinced that he had only the RF Cable in his old system beside the ML Cable and could look at DVD in his bedroom at A Link TV.

He could have done that IFF the DVD player had been hooked up in an analogue manner e.g. SCART, RGB, etc -- but not HDMI.

He will accept the loss of quality of Picture when going via RF. We have Picture now but no sound. We can operate menus.

Gandiman65:

He will accept the loss of quality of Picture when going via RF. We have Picture now but no sound. We can operate menus.

Sounds like (lol) that you have the analogue video signal working - now you just need a parallel cable to carry the audio from the DVD player to the audio inputs of the assigned BeoVision port.

Its the DVD/Bluray player in the 7-55. Will check the Connections.