Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

beovox 3000 speakers connected to beocenter 8500

rated by 0 users
This post has 0 Replies | 1 Follower

hirzenberger
Not Ranked
Posts 1
OFFLINE
Bronze Member
hirzenberger Posted: Wed, Jan 6 2021 6:34 PM

Dear friends of b&o,

two years ago I bought my first b&o-divices: beomaster 1900 and a pair of beovox3000 passive speakers.

I liked the design and all worked perfect for me (in a small breakfast corner in our living room).

Later I extended my beomaster by a beogram cd 3500 cd-player which worked well but the two design lines aren't compareable.

One month ago I replaced the beomaster (and the cd-player) by a beocenter 8500.

Connecting the beovox3000-speakers to the beocenter 8500 I didn't hear any tune while 'listening' radio.

After encreasing the volume to the max volume of 15 now I can hear in average volume which is absolutely necessary.

Reading the manual I found a function 'programming default volume', but all above level 11 is ignored is said there!

beocenter 8500 was testet with another pair of passive JVC-speakers (see below): same disappointing result.

currentyl my beomaster 1900 is connected to the JVC-speakers: satisfying volume and sound quality.

 

So the questions are:

Why do the passive speakers not work properly with beocenter 8500?

What would be better with RL 60.2 speakers?

Would buying a pair of active speakers (beolab 6000/8000?) solve the problem?

 

I am a newby to b&o with less experience in hifi. All suggestions are welcome!

thx 

erich 

 

Here are all the devices I mentioned above:

---------------------------------------------------------------------------------------------------------------------

BeoMaster 1900 - Type 2903

Tuner/Amplifier 

Power output at specified distortion 1000 Hz RMS: 2 x 30 watts / 4 ohms

2 x 20 watts / 8 ohms

Music power: 2 x 50 watts / 4 ohms

2 x 30 watts / 8 ohms

Speaker impedance: 4 ohms

-------------

BeoVox 3000 (Flat Panel) Passive Loudspeakers 

Long-term maximum input power 90 W

Maximum noise power 45 W

Impedance: 8 ohms

-------------

BeoCenter 8500 - Type 2506

Amplifier: Long-term max. output power: IEC 2 x 80 watts / 8 ohms

-------------

Beogram CD 3500 - Type 5146

------------

JVC S-66 - 3way Bassreflex Speaker

Impedence: 8 Ohm

Capacity:  50W (RMS), 100W (Music)

Page 1 of 1 (1 items) | RSS