ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi ,
I'm a proud owner of a BEOPLAY A8 MK2.
It's connected to wifi, so far so good.
I use my android smartphone with DLNA to play radio and my local music.
Everything still good :-)
The BEOPLAY A8 does not go into a stanby mode, the green power led stays green.
I have waited for more then 8 hours , but still green
now i just push the button for 3 seconds to power the unit down , but then also the wifi connection powers down... i can not activate the BEOPLAY with my Smartphone, because its not visible on my network anymore.
So, now a have to turn the unit on or off by hand.....
is this correct , or does the standby function not work ?
Best wishes,
Marc
It goes into 'standby' - and is ready for your wishes 😀
Your A8 is working correct!
When you manually put it into 'deep standby', you will have to wake it manually too.
MM
There is a tv - and there is a BV
Most devices will go from green (power on) to orange (standby)
The led staying green is not logical in my opinion.
The unit stays warm , in standby i would expect the unit to cool down, using less power.
Pushing powerbutton for 3 seconds , all leds go off
Pushing powerbutton for 6 seconds , led turns red
Can somebody confirm ?
snikhaas:Most devices will go from green (power on) to orange (standby) The led staying green is not logical in my opinion. The unit stays warm , in standby i would expect the unit to cool down, using less power. Pushing powerbutton for 3 seconds , all leds go off Pushing powerbutton for 6 seconds , led turns red Can somebody confirm ?
snikhaas:Hi , I'm a proud owner of a BEOPLAY A8 MK2. It's connected to wifi, so far so good. I use my android smartphone with DLNA to play radio and my local music. Everything still good :-) The BEOPLAY A8 does not go into a stanby mode, the green power led stays green. I have waited for more then 8 hours , but still green now i just push the button for 3 seconds to power the unit down , but then also the wifi connection powers down... i can not activate the BEOPLAY with my Smartphone, because its not visible on my network anymore. So, now a have to turn the unit on or off by hand..... is this correct , or does the standby function not work ? Best wishes, Marc
Thanks Räuber,
Does the white wifi led stay on with your Mk1 ?
If i push the powerbutton for 3 seconds, the green led goes off an after a minute or so also the white wifi led goes off.
Can you confirm ?
snikhaas:Thanks Räuber, Does the white wifi led stay on with your Mk1 ? If i push the powerbutton for 3 seconds, the green led goes off an after a minute or so also the white wifi led goes off. Can you confirm ?
My software is the latest version.
Vielen Dank für ihre schnelle antwort :-)