ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
I have a MX4000 with motorised floor stand and an MX4002 with motorised wall bracket but do not have any screws to attach to TV's. Does anyone know what screws I should use to attach the TV's to the stands? I don't want to damage the TV's.
Thanks
Adam
The service manual shows that you need four of 'Screw 5 x 12 mm', by which I assume it means M5 x 12 mm.
Service manuals are available on site to Silver and Gold members if you need more data.
Guy
Thanks Guy. Appreciate such a fast response. Now attached to stand and ready to go!