ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hey!
I believe my remote mcp 6500 works because i see the red lights flash while pushing buttons and then it says no contact.
The problem is the beomaster which doesn´t turn on at all. I have a technician that has measured here and there and i believe he said that the boards get power but the on button doesn´t work or the IR Eye doesnt receive?
Some caps bad or?
Which level of membership gets me the service manual for beomaster 6500?
Thankfull for any advise!
Robert
Hi Robert,
a silver mebership gives you acces to the complete Manual section. A gold membership gives you addtional the possibility to win in every of the 4 prize draws each year.
Ralph-Marcus
Is the red standby dot lit on the Beomaster ?
Martin
Hey and no, the red standby doesn't lit up.
I currently struggled thru my older emails and found a message from you Martin :)
There you suggested i would " check the reset circuit for function and the power supply to the processor for ripple and correct voltage".
I will let the technician do that and get back to the forum when we made progress.