ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
So one of the channels is working just fine, the other I measure 0mv, is the potentiometer dead or should I check for anything else too?
Also the base of both ic200 and ic201 is about 0.1v which is too low compared to ic100 ad ic101 which is about 1.1v
edit2: between diods d203 and d201 there should be about 1.7 v, which i got in the working channel but only about half of it on the non working side
Yiangos
Soldering on the output transistors, solved:) Thank you Martin
[please delete]