ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hello Fellow Beophiles
I have a Beosystem 3 connected to a Panasonic 50 Plasma. The signal output by the BS3 is jumpy if i bypass the BS3 and connect the video feeds directly from the respective source (Blu-Ray, Apple TV, Cablebox, etc) the picture is perfect. Any ideas why the BS3 would output a jumpy pciture?
Any and all input i appreciated,
Thank all!
Kevin D. Huber
aka Beodude
BeoCemter 9500, BeoSystem 5500, BeoSystem 6500, Penta III, BeoLab 4000, BeoLab 4500, BeoLab 4, BeoMedia 1, BeoSystem 1, BeoSystem 4, BeoLink Passive, BeoLink Active, BeoVox RL40, BeoVox RL60, BeoLab 3500, BeoVision 7-40, Beo4, Beo5, BeoPC, Playmaker,
Hi Kevin. Welcome to beoworld.
Please take a look at this thread and see if it describes your symptoms:
http://archivedforum2.beoworld.org/forums/t/16939.aspx
The posted solution involves changing one of the settings in the service menu, and details of how to access this menu are in one of the posts on that thread too.
Hope this helps...
Martin.