ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Well my Beomaster 3300 Remote has never worked and finally got around to taking the back panel off and found out why looks like someone must have hit it and snaped it off when putting the back panel back on. any ideas of the best way to go about fixing this any help would be greatly appreciated here are some pics of the problem.
[View:http://archivedforum2.beoworld.org/themes/hawaii/utility/:550:0]
Beosystem 4500 With Beogram rx2
Beomaster & Beocord 3300
Beocenter 9000
Beosound 2000
Beolab 6000
Rl 140 & Rl 35
Beovox S75
Well, those pictures aren't the sharpest ones
That's the way it should look like:
So at least the IR Diode is missing - not mentioning the broken part of the PCB.
IR Diode is a BPW82.
Gunther
Yes sadly didnt have my camera with me had to use the cell phone camera pics look so much better on the nice 4 inch screen lol
Thank you for the diode part number now i just gotta figure out how to rig it up to work with the missing part of the PCB board. have replaced caps lights etc but never ir diode with missing board this will be a first to figure out.
I have a spare IR board (module 4) in stock, used but intact.
Martin
do you happen to have a pic of it sadly im not 100% what module 4 is 3300 system is new to me.
Thank you
Taylor T
Module 4 is the board with components that hold the IR receiver.The board that is broken in your Beomaster.See the 4 in the circle on your board ?Photos:
Dillen: Module 4 is the board with components that hold the IR receiver.The board that is broken in your Beomaster.See the 4 in the circle on your board ?Photos: Martin
Wow i need more sleep even looking at the service manual i missed that. How much would you be looking for it if your looking to sell ?
Taylor T.
You have email.