Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Beosound 3000 - CD clamper not moving

rated by 0 users
This post has 0 Replies | 1 Follower

RobN
Not Ranked
Posts 54
OFFLINE
Bronze Member
RobN Posted: Sun, Mar 13 2016 12:41 PM

Hi All,

I'm hoping for some help with my trusty BS3000, which has given many years of good service. Although I now primarily play music via N.MUSIC my wife still likes putting CDs in. Recently the CD clamper (of the large variety) has stopped working, but I can hear a motor whirring inside when I press Load. Even when I manually open and close the clamper the CD will not play and the motor whirrs for a considerable time before stopping. I would appreciate your help with a few questions and any relevant experience, many thanks.

My questions to fellow forum members are:

1) Has anyone else had this problem and is it most likely just a rubber drive belt?

2) If the answer to 1) is yes, can you obtain these belts in the UK easily and

3) As I am good at repairing antique clocks and watches is the replacement of the belt relatively straightforward?

Many thanks and best regards,

Rob

Page 1 of 1 (1 items) | RSS