ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi all,
I hope someone can help with this.
I have a Beocenter 2500 s/w 1.8 and hope to buy a broken Beocenter 2500 with s/w 2.0.
My question is this, I have a Beolink 7000 RDS unit with new back light and caps fitted and works like a dream.
I to make my Beocenter 2500 run a RDS unit that I have, but need to fit the software 2.0 from the broken unit.
Do I just change PCB 3 that has the microprocessor and do I need to change anything else?
Keith
There is not much else you can change, other than the processor board :) The rest will be just the same.
But.. be aware that your BL7000 will NOT show RDS info from the BS2500, only Beomaster 7000 will send RDS info to the Beolink 7000.
You will however see RDS info in the green display on BS2500.
/Weebyx
Many thanks for your quick response Weebyx.
So not really worth doing, I had the idea that the Beolink 7000 would show the RDS information BS2500.
Thanks for putting me straight.
Cheers