Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Beolab 90 and Beo remote 1

rated by 0 users
This post has 26 Replies | 1 Follower

Nodarkatz13844
Not Ranked
Posts 19
OFFLINE
Bronze Member
Nodarkatz13844 Posted: Sun, Oct 20 2019 2:41 PM

I want to control Beolab 90 with beo1 remote. IR is connected to master speaker. On remote I have done everything what is required in technical guidance for Beolab 90: setting, advanced, product, Beosound, renamed to Beolab 90. Still no response from Beo 1. Does anyone can help me? Thanks 

Razlaw
Top 25 Contributor
Posts 4,345
OFFLINE
Bronze Member
Razlaw replied on Sun, Oct 20 2019 5:24 PM
There are different or eyes. When I first connected an ir to my 50s it did not work. Maybe check if you have the right ir eye?

Beolab 28s Beolab 9s Beolab 12-3s Beolab 1s Beolab 6000s 2 pairs Beolab 4000s Beovision 7-55 Beovision 10-40 Beoplay V1 32 inch Beovision Avant 32 inch Beosound 1 (CD player) Beosound 3000 Beosound 5 Core Essence MKII Beoplay M5

Nodarkatz13844
Not Ranked
Posts 19
OFFLINE
Bronze Member

I bought the right IR from my dealer.

I followed all his instructions but Beo 1 remote doesn’t control Beolab 90. 
 Any other suggestions? I read in technical guide for beolab 90 that speakers must be paired with Beosound. How?

Razlaw
Top 25 Contributor
Posts 4,345
OFFLINE
Bronze Member
Razlaw replied on Sun, Oct 20 2019 11:18 PM
I think you can ignore the pairing. I wondered about that myself when I set up my 50s. I am not sure what else to suggest.

You are selecting Beolab 90 with the BR1 so it is the active mode before using? And I suppose it is possible dealer gave you the wrong ir eye? It should be the plain one with no lettering on the buttons.

Here is an old thread on the subject.

https://archivedforum2.beoworld.org/forums/t/35599.aspx

Beolab 28s Beolab 9s Beolab 12-3s Beolab 1s Beolab 6000s 2 pairs Beolab 4000s Beovision 7-55 Beovision 10-40 Beoplay V1 32 inch Beovision Avant 32 inch Beosound 1 (CD player) Beosound 3000 Beosound 5 Core Essence MKII Beoplay M5

Nodarkatz13844
Not Ranked
Posts 19
OFFLINE
Bronze Member

The I got from the dealer is the right 

Nodarkatz13844
Not Ranked
Posts 19
OFFLINE
Bronze Member

I got from the dealer the correct IR. Something I am doing wrong but can not figure it out

Razlaw
Top 25 Contributor
Posts 4,345
OFFLINE
Bronze Member
Razlaw replied on Mon, Oct 21 2019 12:22 AM
Hopefully somebody here with more knowledge than me will be able to help. I am trying to remember, I might have had to connect the ir eye, unplug the 50s, and then plug in again to get them to recognize that the eye was connected.

Beolab 28s Beolab 9s Beolab 12-3s Beolab 1s Beolab 6000s 2 pairs Beolab 4000s Beovision 7-55 Beovision 10-40 Beoplay V1 32 inch Beovision Avant 32 inch Beosound 1 (CD player) Beosound 3000 Beosound 5 Core Essence MKII Beoplay M5

Nodarkatz13844
Not Ranked
Posts 19
OFFLINE
Bronze Member

I thought about it but never did it . When I am home I will try and let you know. Thank you very much for your help 

Nodarkatz13844
Not Ranked
Posts 19
OFFLINE
Bronze Member

I tried to unplug and plug back but Beo 1 is still not working with speakers.

Nodarkatz13844
Not Ranked
Posts 19
OFFLINE
Bronze Member

I tried to unplug and plug back but Beo 1 is still not working with speakers.

seethroughyou
Top 100 Contributor
UK
Posts 999
OFFLINE
Bronze Member
Instructions for wiring the iR eye to the BL90 master that came were incorrect. Dealer had to contact B&O and send revised instructions.

.

 

 

Present: BL90, Core, BL6000, CD7000, Beogram 7000, Essence Remote.

Past: BL1, BL2, BL8000, BS9000, BL5, BC2, BS5, BV5, BV4-50, Beosystem 3, BL3, DVD1, Beoremote 4, Moment.

.

Nodarkatz13844
Not Ranked
Posts 19
OFFLINE
Bronze Member

Thanks, I give this message to my dealer.

Nodarkatz13844
Not Ranked
Posts 19
OFFLINE
Bronze Member

By the chance, do you know correct wiring?

poodleboy
Top 500 Contributor
Posts 303
OFFLINE
Bronze Member
poodleboy replied on Mon, Oct 21 2019 12:03 PM

Dealer takes all that money and can't be bothered ensuring the products work. Customer has to use beocare or beoworld. Compare that with other "luxury" brands. 

Razlaw
Top 25 Contributor
Posts 4,345
OFFLINE
Bronze Member
Razlaw replied on Mon, Oct 21 2019 12:42 PM
Nodarkatz13844:

By the chance, do you know correct wiring?

I wired my mine as shown in the diagram in the other thread I posted a link to.

Beolab 28s Beolab 9s Beolab 12-3s Beolab 1s Beolab 6000s 2 pairs Beolab 4000s Beovision 7-55 Beovision 10-40 Beoplay V1 32 inch Beovision Avant 32 inch Beosound 1 (CD player) Beosound 3000 Beosound 5 Core Essence MKII Beoplay M5

Jeff
Top 25 Contributor
USA
Posts 3,793
OFFLINE
Silver Member
Jeff replied on Mon, Oct 21 2019 2:20 PM

poodleboy:

Dealer takes all that money and can't be bothered ensuring the products work. Customer has to use beocare or beoworld. Compare that with other "luxury" brands. 

And over here anyway my closest dealer is so far away that communications are hampered by delays caused by the speed of light the distance is so great.

Jeff

I'm afraid I'm recovering from the BeoVirus. Sad

Nodarkatz13844
Not Ranked
Posts 19
OFFLINE
Bronze Member

 

 
Razlaw 
Top 25 Contributor
3,734 Posts 
OFFLINE
Bronze Member
Thank you. That is a different wiring plan than the one I followed. One I followed was same three terminals, also with two grounds on the first terminal, but different colors were indicated. I will rewire and try again.
This is what I found in that link but I cannot understand how did you wired it. Can you please clarify?
poodleboy
Top 500 Contributor
Posts 303
OFFLINE
Bronze Member
poodleboy replied on Mon, Oct 21 2019 2:39 PM

Jeff:

poodleboy:

Dealer takes all that money and can't be bothered ensuring the products work. Customer has to use beocare or beoworld. Compare that with other "luxury" brands. 

And over here anyway my closest dealer is so far away that communications are hampered by delays caused by the speed of light the distance is so great.

Maybe so, but if you pulled your charge card out of your wallet I bet they could smell it from 1000km away. 

Nodarkatz13844
Not Ranked
Posts 19
OFFLINE
Bronze Member

Do you know how to wire correctly?

Razlaw
Top 25 Contributor
Posts 4,345
OFFLINE
Bronze Member
Razlaw replied on Mon, Oct 21 2019 7:19 PM
Nodarkatz13844:

Razlaw 3,734 Posts OFFLINE Reply Suggest as Answer Verify Answer More Razlaw replied on 07-22-2019 5:45 PM Thank you. That is a different wiring plan than the one I followed. One I followed was same three terminals, also with two grounds on the first terminal, but different colors were indicated. I will rewire and try again. This is what I found in that link but I cannot understand how did you wired it. Can you please clarify?

There is a wiring diagram posted in that thread. It is in the post by Esax. I wired mine as shown in the lower of the two drawings. Looking at the drawing now again, it does specifically say it is the wiring for the 90s. The date of that post is July 22.

Beolab 28s Beolab 9s Beolab 12-3s Beolab 1s Beolab 6000s 2 pairs Beolab 4000s Beovision 7-55 Beovision 10-40 Beoplay V1 32 inch Beovision Avant 32 inch Beosound 1 (CD player) Beosound 3000 Beosound 5 Core Essence MKII Beoplay M5

Razlaw
Top 25 Contributor
Posts 4,345
OFFLINE
Bronze Member
Razlaw replied on Mon, Oct 21 2019 7:26 PM
Nodarkatz13844:

Razlaw 3,734 Posts OFFLINE Reply Suggest as Answer Verify Answer More Razlaw replied on 07-22-2019 5:45 PM Thank you. That is a different wiring plan than the one I followed. One I followed was same three terminals, also with two grounds on the first terminal, but different colors were indicated. I will rewire and try again.

This is what I found in that link but I cannot understand how did you wired it. Can you please clarify?

The post with the diagram is the one immediately preceding this post of mine.

Beolab 28s Beolab 9s Beolab 12-3s Beolab 1s Beolab 6000s 2 pairs Beolab 4000s Beovision 7-55 Beovision 10-40 Beoplay V1 32 inch Beovision Avant 32 inch Beosound 1 (CD player) Beosound 3000 Beosound 5 Core Essence MKII Beoplay M5

Nodarkatz13844
Not Ranked
Posts 19
OFFLINE
Bronze Member

I can not find the diagram. Can you please post one more time?

Razlaw
Top 25 Contributor
Posts 4,345
OFFLINE
Bronze Member
Razlaw replied on Mon, Oct 21 2019 7:51 PM
Here is the link again for the Beoworld thread. The diagram is in the sixth post in this thread, posted by Esax. I am sorry I do not know how to post just the single post with the diagram.

https://archivedforum2.beoworld.org/forums/t/35599.aspx

Beolab 28s Beolab 9s Beolab 12-3s Beolab 1s Beolab 6000s 2 pairs Beolab 4000s Beovision 7-55 Beovision 10-40 Beoplay V1 32 inch Beovision Avant 32 inch Beosound 1 (CD player) Beosound 3000 Beosound 5 Core Essence MKII Beoplay M5

Mikipidia
Top 50 Contributor
Posts 2,169
OFFLINE
Bronze Member
Mikipidia replied on Mon, Oct 21 2019 9:31 PM

New: Beovision Harmony, Beolab 50's, Beolab 28's, Beolab 18's, Beolab 17's, Beosound Stage & LG, Beosound 2, Beoplay M3, Beoplay A1, Beoplay Portal, Beoplay H4 gen 2, Beoplay E8 3.0

Mikipedia on YouTube: https://www.youtube.com/c/Mikipedia

Mikipedi4 on Twitch: https://www.twitch.tv/mikipedi4

Mikipedia on Intagram: https://www.instagram.com/mikipedi4/

Old: Beosound 9000 mk3, Beolab 3's, Beovision Eclipse, Beolab 1's, Beolab 2, Beovision 10-46, Overture 2300, beolab 8000's, Beolab 4000's, Beovision avant 32" etc. etc.

Nodarkatz13844
Not Ranked
Posts 19
OFFLINE
Bronze Member

I tried bottom diagram and it didn’t work.

Any suggestions?

Mikipidia
Top 50 Contributor
Posts 2,169
OFFLINE
Bronze Member
Mikipidia replied on Mon, Oct 21 2019 10:47 PM

either the eye is wrong or you have the eye in the wrong socket or something else is going on where you probably need a dealer to come by. incedentally, have you fully updated them to the latest software? Could we maybe get some pictures on how it's all connected? easiest way is probably to use the app for that.

New: Beovision Harmony, Beolab 50's, Beolab 28's, Beolab 18's, Beolab 17's, Beosound Stage & LG, Beosound 2, Beoplay M3, Beoplay A1, Beoplay Portal, Beoplay H4 gen 2, Beoplay E8 3.0

Mikipedia on YouTube: https://www.youtube.com/c/Mikipedia

Mikipedi4 on Twitch: https://www.twitch.tv/mikipedi4

Mikipedia on Intagram: https://www.instagram.com/mikipedi4/

Old: Beosound 9000 mk3, Beolab 3's, Beovision Eclipse, Beolab 1's, Beolab 2, Beovision 10-46, Overture 2300, beolab 8000's, Beolab 4000's, Beovision avant 32" etc. etc.

Nodarkatz13844
Not Ranked
Posts 19
OFFLINE
Bronze Member

Problem is solved. Wiring was correct. 
The problem was that I was not finishing all instructions  on Beoremote 1 . Thanks everyone for your suggestions.

Page 1 of 1 (27 items) | RSS