Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Beolab 5 speakers connect via Powerlink to other brand?

rated by 0 users
This post has 2 Replies | 0 Followers

Flere
Top 200 Contributor
Netherlands
Posts 345
OFFLINE
Bronze Member
Reply
Flere Posted: Thu, Dec 29 2016 5:04 PM
Is it possible to drive the Beolab 5 speakers

So connect the Beolab 5 speakers to each other via Powerlink and then connect one of them via Powerlink to a pre amp out and 12v trigger signal?

Or does the Beolab 5 expect something special on the Powerlink connection?

I was thinking about this because I would like to use the 12v trigger of the pre amp to switch the Beolab on and off.

Any experiences with this?

- Flere

smile and enjoy the moment

kallasr
Top 50 Contributor
Germany
Posts 2,562
OFFLINE
Bronze Member
Reply
kallasr replied on Thu, Dec 29 2016 5:24 PM
Check av-connection.dk for possibilities/cables. I used their cables for Beolab 7/8/4000.

Also our sponsor http://soundsheavenly.com might have the cables you need!

I assume a preput is always mono so you need to rin the 2 cables seperately.

Ralf

Living Room: Beosystem 4, Beolab 7-2 (Center), Beolab 9 (Fronts), Beolab 8000 (Rears), no Subwoofer. Screen: Sony KD-85XH9096
Dining Room: Beosound Essence MK II with Beolab 4000 on stands, fed by Amazon Echo Show 8
Home Cinema: Beosystem 4, Beolab 7-4 (Center), Beolab 1 (Fronts), Beolab 4000 (Rears). Projector: Sony VPL-HW55
Home Office: Beosystem 3, Beolab 7-4, Beolab 5000, Screen: Sony KD-55XH9005 on Beovision 7-40 stand, ML to Beosound 9000 MK3 and Beosound 5/Beomaster 5 (1 TB SSD version)
Bedroom: Sony KD-65XH9077, Beosound Essence MK II with Beolab 6002 and Beolab 11 (all white, wall-mounted)

In storage: Beolab 5000/Beomaster 5000 (1960s). 

Flere
Top 200 Contributor
Netherlands
Posts 345
OFFLINE
Bronze Member
Reply
Flere replied on Thu, Dec 29 2016 9:42 PM
kallasr:

Check av-connection.dk for possibilities/cables. I used their cables for Beolab 7/8/4000.

Also our sponsor http://soundsheavenly.com might have the cables you need!

I assume a preput is always mono so you need to rin the 2 cables seperately.

Thanks for the .dk pointer.

My question still if if this will work for the Beolab 5 as they use some data part in the Powerlink.

And, no, the sponsor refused to make such a cable for me in the past.

- Flere

smile and enjoy the moment

Page 1 of 1 (3 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly