Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

Beocenter 4600: small plastic piece of the tone arm holding the cartridge broken

rated by 0 users
This post has 1 Reply | 1 Follower

Bernd99

Posts 2

OFFLINE

Bernd99 Posted: Thu, Jan 26 2017 8:04 PM

rated by 0 users

I stupidly broke the small plastic piece at the end of the tone arm that usually holds the cartridge. On the picture it is bottom left, shown upside down. Is there anything I can do about it?

I was immediately thinking of glueing it back. But after that shock I do not want to make things worse. I was only trying to pull the cartridge of. I thought I did not use a big force, but it must have been too much. It is the old Beocenter 4600 of my parents, which I wanted to reactivate after over 10 years.

Hopefully I do not have to exchange the tone arm.