ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Dear,
Try Aopt 3.
Hello Everybody
I have the same problem with BS9000. I have Beosound5 / Beomaster5 in one room and BS9000 in another room together with Beolab 3500.
The units are connected with ML and I want to use the BS9500 as aditional CD player. There are no PL connections.
What option settings do I need for the 2 rooms. How do I start the Beosound 9000 with ML ?
Best regards and many thanks!
Rudolf
BeoVision11, BeoVision10, BeoSound 5, BeoSound 3500, BeoLab 9, BeoLab 4, BeoLab 6000, BeoLab 8000, BeoSound 3200, Beosound Moment,NL/ML converter, delaybox, var.BeoPlay Speakers
Sorry to inform you that A option 3 did not effect the beosound 9000. In my case, only 0, 1, 2, 5, 6
Wild Ruedi:Hello Everybody I have the same problem with BS9000. I have Beosound5 / Beomaster5 in one room and BS9000 in another room together with Beolab 3500. The units are connected with ML and I want to use the BS9500 as aditional CD player. There are no PL connections. What option settings do I need for the 2 rooms. How do I start the Beosound 9000 with ML ? Best regards and many thanks! Rudolf
Regards
Kiran
Born in NL; I ride ML
danielshen: Dear, I have beosound 9000 and beomaster 7000 in the same room. The problem is that every time when I want to use BEO4 to control beosound 9000, my beomaster 7000 will get the same command. I want to make my beosound 9000 react to LINK command of BEO4 every time (like LINK + RADIO, or LINK + CD) only. And I can use my master control panel 6500 to control my beomaster 7000. Then I will have happy life everyday. However, I find I can not set my beosound 9000 as A.OPT 4. Only A.OPT 0, 1, 2, 5, 6 is possible to set for beosound 9000. Do you have any ideas for this? Please help. Many thanks! With kind regards, Daniel
If I remember correctly, I've had a special made software for this years ago.
Software 1.4 was created by B&O to set the master in Option 0, but still the 2 way infrared kept working for the MCP.
The master 7000 was sold in the days of the introduction of the (1-way) Beovision Avant. Then the Avant was linked and set in option 2 and the BM7000 in option 0. But after complaints of losing the 2-way control, this software was developed.
Another solution is putting the BM7000 in option 3 (that works, I've checked) and remain the BS9000 in option 1.
This above only works with a Beo4 (or older BL1000), with LINK as possible instruction.
danielshen:Do you have any ideas for this?
A NL BeoVision with two NL/ML converters connected. One NL/ML converter connected with the BS9000 the other to the BS7000 through a T1611
not the cheapest solution but one which will actual work!
I can set the option 3 to my beomaster 7000, however, i still can not beo4 (without link command) to control the beomaster 7000. Looks option3 is same as the option 1 for beomaster 7000;
Anyway, I think what I really like is set 0 to beomaster 7000, but I can still use my MCP6500 to control the beomaster 7000. Could you advise how can that happen? And where I can get the Software 1.4 and how to install the software?
Many thanks!
I like this option. However, my beosound 9000 is currently connecting to beolab 3500 via the masterlink cable. Therefore, how the NL/ML can be used for beomaster 7000, beosound 9000 and beolab 3500 all in together?