Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

How to reset the ip of the BEOLINK CONVERTER NL/ML

rated by 0 users
This post has 4 Replies | 0 Followers

t034780
Not Ranked
Posts 8
OFFLINE
Bronze Member
Reply
t034780 Posted: Fri, Sep 1 2017 7:05 PM

Hi all,

 

I had the Beolink convertor working but had the ip address set to static. However after renewing my provider modem (with a different ip range) I am not able to find the web page of the Beolink anymore.

How can I reset the convertor to the standard ip address?

All tips are welcome.

 

With kind regards.

 

Ivan

 

Pat
Top 500 Contributor
Posts 152
OFFLINE
Bronze Member
Reply
Pat replied on Sat, Sep 2 2017 12:35 AM
Hi Ivan,

Press and hold button and watch the light (has to flash 7 times), then release the button and right after press just once.

Pat
Carolpa
Top 75 Contributor
Posts 1,700
OFFLINE
Silver Member
Reply
Carolpa replied on Sat, Sep 2 2017 5:06 AM

t034780
Not Ranked
Posts 8
OFFLINE
Bronze Member
Reply
t034780 replied on Sun, Sep 3 2017 4:48 PM

Thanks for this scheme however where can I find the setup button? I did look multiple times at the beolink convertor however  couldn't  find any button or lookalike.

I did manage to resolve the issue by directly connecting the beolink convertor to the pc. After adjusting the ip from the pc in the static range of the beolink convertor I could succesfully ping. Then I was able to connect again to the web interface.

Regards.

Carolpa
Top 75 Contributor
Posts 1,700
OFFLINE
Silver Member
Reply
Carolpa replied on Sun, Sep 3 2017 4:51 PM

on the bottom of the small hole just aside the light; use for example a paperclip to press it

Page 1 of 1 (5 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly