Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Hex tool for BeoLab 2

rated by 0 users
This post has 3 Replies | 1 Follower

jkhamler
Top 500 Contributor
Posts 286
OFFLINE
Bronze Member
Reply
jkhamler Posted: Wed, Sep 5 2012 4:41 PM

Hello.

Can somebody advise me of the size/shape of the small tool used for adjusting the screws on the underside of the BeoLab 2? I want to get some tilt!

Thanks, Jon

Jeff
Top 25 Contributor
USA
Posts 3,793
OFFLINE
Silver Member
Reply
Jeff replied on Wed, Sep 5 2012 5:53 PM

I have no idea, but can you say what you mean by tilt? The BL2 is a sphere on a rubber ring, are you talking about an audio adjustment?

Jeff

I'm afraid I'm recovering from the BeoVirus. Sad

jkhamler
Top 500 Contributor
Posts 286
OFFLINE
Bronze Member
Reply
jkhamler replied on Wed, Sep 5 2012 7:14 PM

Hi Jeff, yes I mean tilt in the the physical sense. If you loosen the screws on the underside the sub can be tilted, as per this pic

http://www.davidlewisdesigners.com/files/images/300_BeoLab2.jpg

hfat
Top 150 Contributor
Vienna, Austria
Posts 663
OFFLINE
Bronze Member
Reply
hfat replied on Wed, Sep 5 2012 7:26 PM

To bring the BL2 into this position you simply have to lift it grabbing it in the middle hole on top, without actually lifting it from the ground. In this positioon you can easily tilt it without any tool.

hfat

Page 1 of 1 (4 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly