ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Line out. If I remember correctly it has volume adjustment
"You think we can slap some oak on this thing?"
Being picky, but I think that the volume controlled output is actually called 'PRE OUT' on the BM5500. The connectors are just below the passive speaker sockets.
But have a look here also: http://archivedarchivedforum2.beoworld.org/forums/p/38944/323344.aspx
Hi Pat,
Yes, Guy is correct. You should see a pair of RCA/phono sockets on the rear panel of the Beomaster marked “Pre-Amp Out Left/Right”, the following cable will connect from the pre-out sockets on the Beomaster into the “Line” sockets of the Beolab 8000 speakers:-
http://soundsheavenly.com/line-in-connection/6-av-processor-pre-amp-sonos-to-beolab-rca-line-in.html
Please set both speakers to “Line” mode using the small switch next to the input sockets.
Kind regards, Steve.
Steve.
www.soundsheavenly.com
Founder of Sounds Heavenly Cables and Brand Ambassador for Bang & Olufsen
Sounds Heavenly are proud to sponsor BeoWorld!
Please check out my YouTube channel at https://youtube.com/soundsheavenlycables