ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
I am a new owner of my first acquired B & O sound system, BS5, BM5 with CD Ripper, I tried install the Beosystem 4 with a Projector, but in HDMI out i can see nothing, my projector not detect video from Beosystem 4, the connector HDMI is OK,
This is my connection.
HDMI 1 IN -------> PC
HDMI Out ------> Projector
Ethernet -------> Router (I have Beolink Converter...)
AC Power
I need something?
Note: My Pc detect video output, i can duplicated and extend screen but in Projector i can see, tried with tv but i can see nothing, Help me Please.
Hi, I reset the BeoSystem 4 when i connected the Projector, my projector detected the BeoSystem 4 and i can saw of Logo of bang & olufse, but next to 2 minutes the screen is black and my poyector lost the video. I don't can configurate my Beosystem 4 our i can configurate with Beolink Converter?
Help me :(
Schallertech: Hi, I reset the BeoSystem 4 when i connected the Projector, my projector detected the BeoSystem 4 and i can saw of Logo of bang & olufse, but next to 2 minutes the screen is black and my poyector lost the video. I don't can configurate my Beosystem 4 our i can configurate with Beolink Converter? Help me :(
One thing to check is that your screen resolution from your computer to the BS4 matches the output to the projector. I will GUESS the input is 1080p or greater from a computer. If your projector does not match I am sure someone on this site will understand how the BS4 can match them up. Good luck.
Living Room: Beosystem 4, Beolab 7-2 (Center), Beolab 9 (Fronts), Beolab 8000 (Rears), no Subwoofer. Screen: Sony KD-85XH9096Dining Room: Beosound Essence MK II with Beolab 4000 on stands, fed by Amazon Echo Show 8Home Cinema: Beosystem 4, Beolab 7-4 (Center), Beolab 1 (Fronts), Beolab 4000 (Rears). Projector: Sony VPL-HW55Home Office: Beosystem 3, Beolab 7-4, Beolab 5000, Screen: Sony KD-55XH9005 on Beovision 7-40 stand, ML to Beosound 9000 MK3 and Beosound 5/Beomaster 5 (1 TB SSD version)Bedroom: Sony KD-65XH9077, Beosound Essence MK II with Beolab 6002 and Beolab 11 (all white, wall-mounted)
In storage: Beolab 5000/Beomaster 5000 (1960s).
I seem to recall reading somewhere that after you set the BS4 to work with a projector that you need to unplug the power to the BS4 and then reconnect the power.
thank you very much to all and I managed to solve my problem, it turns out that I did not have the control application so the BeoSystem was placed in sleep mode, I have video :)
Schallertech:... I did not have the control application so the BeoSystem was placed in sleep mode...