ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi I have a 6500 set up with and MCP, which is fine.
Can use a hand held remote with the above set up and if so which Beo 4 (?) remote?
Regards
Beolink 1000Beo4
Martin
Or you can use a Beolink 5000 (also two way remote).
Thomas
Format 0 😀😎
Just
Dillen: Beo4
Beo4
NOT the Beo 4 with the Joystick/Navigation button.
The one with SAT, CD, A.TAPE etc. was the "original" one.
Ralf
Living Room: Beosystem 4, Beolab 7-2 (Center), Beolab 9 (Fronts), Beolab 8000 (Rears), no Subwoofer. Screen: Sony KD-85XH9096Dining Room: Beosound Essence MK II with Beolab 4000 on stands, fed by Amazon Echo Show 8Home Cinema: Beosystem 4, Beolab 7-4 (Center), Beolab 1 (Fronts), Beolab 4000 (Rears). Projector: Sony VPL-HW55Home Office: Beosystem 3, Beolab 7-4, Beolab 5000, Screen: Sony KD-55XH9005 on Beovision 7-40 stand, ML to Beosound 9000 MK3 and Beosound 5/Beomaster 5 (1 TB SSD version)Bedroom: Sony KD-65XH9077, Beosound Essence MK II with Beolab 6002 and Beolab 11 (all white, wall-mounted)
In storage: Beolab 5000/Beomaster 5000 (1960s).
If still using a turntable I would go for a BL1000; then you can access PHONO with just a single button press.
(Of course you can do this with BL5000 also, but they are a bit pricey and also quite fragile)
Ralf, thank you.
Can you tell me why?
I am using a T/T - Ralf suggests using the original one. Is this the one you refer to?