Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Old BeoSound 1 power failure

rated by 0 users
This post has 1 Reply | 0 Followers

Beoberg
Top 500 Contributor
Odense, Denmark
Posts 315
OFFLINE
Bronze Member
Reply
Beoberg Posted: Fri, Aug 24 2018 8:56 AM

Hi fellow BeoWorlders

I have an old BeoSound 1 that will not power up correctly. The red LED flashes red once powered on from mains. The open/close machanism and antenna work fine but nothing else works. Any idea what I should be looking to replace or any specific parts of the PCB that I should be looking at?

Best regards,

Frederik

BeoVision Eclipse 55, BeoPlay S8 (sub+rears), BeoPlay A9 MKII (living room), BeoVision Avant 32 DVD (retro gaming, basement), BeoLab 4000 (entertainment room, basement), BeoSound 8 (workshop), 2x BeoPlay S3 (PC), BeoPlay A1, BeoPlay H2/H3 (on the go)

Beoberg
Top 500 Contributor
Odense, Denmark
Posts 315
OFFLINE
Bronze Member
Reply
Beoberg replied on Mon, Aug 27 2018 6:48 AM

Any ideas?

BeoVision Eclipse 55, BeoPlay S8 (sub+rears), BeoPlay A9 MKII (living room), BeoVision Avant 32 DVD (retro gaming, basement), BeoLab 4000 (entertainment room, basement), BeoSound 8 (workshop), 2x BeoPlay S3 (PC), BeoPlay A1, BeoPlay H2/H3 (on the go)

Page 1 of 1 (2 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly