ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hello, my first post here from Down Under where it's as hot as hell, and envying all Northern Hemisphere members wherever you may be.
After a period of two years idleness, the tray on this Beocord 5500 will not eject. I suspect rather than know it will be a broken belt?
I have a user manual but would dearly like a PDF technical manual to assist me do some home repairs.
In any case, I assume it might simply be a handful screws to open the case and expose the belt/s. I have no known dealer here in Australia and would appreciate a push in the direction of belts and bits for these machines.
Any advice most welcomed. Thank you.
A full service manual is available on site for gold and silver members
Ron
Yes, but the servicemanual will not tell you how to replace the belts.I can supply belts and I can include detailed mounting instructions (photos and english text).
Martin
Dillen, you’re the man! 😀
Please advise how to order the belts from you, and your payment requirements also.
Very pleased to have found you!
Email or PM me.