ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi,
I am having trouble to add a new satellite. Hotbird and Astra 19. Astra 1 and Hotbird are working fine. I can receive this satellite with my other TV's I also know the diseq switch setting.
Can anyone help with that or can anyone send me a link to the sat. module manual please.
This is the satellite-transponder I would like to add:
Digital Satellite 1
Astra 2E (28.2° East) Transponder 45 Frequency: 10.77325 GHz Horizontal polarisation Modulation: DVB-S, QPSK Symbol rate: 22.0 Mbaud FEC 5/6
Transport Stream ID: 2045
Thanks for your help.
I am assuming from your first sentence that your BeoVision 6-26 and your other TV's are using the same dish. Please confirm.
How are you trying to add the new satellite?
The best way to add a satellite is to use the "SEARCH" function by going into SETUP then CHANNEL/STATIONS then SEARCH
In the SEARCH menu, you set your preferences for a channel or station search:POSITIONS … Select which position you wish to search from, hide* or show positions in the list or edit position information – Use the “edit” function to change the settings for a chosen position. SEARCH FILTER … Select whether to search for all channels or free-to-air channels only.SEARCH MODE … Select either automatic or manual search.FREQUENCY … If you have chosen manual search, you can enter a search frequency.SYMBOL RATE … If you have chosen manual search, you can set a symbol rate value.NETWORK SEARCH … If you have chosen manual search, you can search for all channels and stations found in a specific network by choosing "YES"
Regards Keith....
Dear Keith,
thanks a lot for your reply, yes All TV use the same dish. I tried your way, and it worked perfectly fine. Thanks so much and have a happy Easter,
Erik