Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Beocenter 7002 dust cover restoration

rated by 0 users
This post has 3 Replies | 1 Follower

tranbertclo
Not Ranked
Posts 2
OFFLINE
Bronze Member
Reply
tranbertclo Posted: Wed, Jul 24 2019 2:48 PM

Hello from France,

I have an issue with the dust cover of my newly acquired Beocenter 7002 : the plastic hinges are totally broken.

I will be able to build new ones with some plexiglass + superglue, but I need first a picture of a complete one to see what I have to obtain.

If somebody can send me one pic of is fully operational Beocenter 7002 dust cover (focus on the hinges !), thanks !

Bertrand

 

 

CB
Top 75 Contributor
> You are Here <
Posts 1,762
OFFLINE
Bronze Member
Reply
CB replied on Mon, Jul 29 2019 7:12 PM
Bonjour Bertrand

J’ai fait ce que j’ai pu...

C’est ultra fragile !

Looking from inside

Left hinge

Center hinge (2 pics)

Right hinge

Left side

Back

tranbertclo
Not Ranked
Posts 2
OFFLINE
Bronze Member
Reply
tranbertclo replied on Tue, Jul 30 2019 1:50 PM

Thanks a lot ! Merci beaucoup !

What I don't have is the "fil de fer" / "tringle" / rod that permits to keep the cover wide up and opened !

So touchy to build a new one ...

Bertrand

CB
Top 75 Contributor
> You are Here <
Posts 1,762
OFFLINE
Bronze Member
Reply
CB replied on Tue, Jul 30 2019 3:26 PM
I probably have one, somewhere...

If you’re in Orange (84) area sometimes, mail me Smile
Page 1 of 1 (4 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly