ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi all
Well I've just replaced the tape deck belts, sorted some dry joints, replaced some caps & re-glued the glass panels. It's all working fine.
However - I suspect the drive-belts for the doors need replacing. They are slipping which is causing the belts to squeal. It's most noticeable on power-down, when the door motors run on for a few seconds.
I have already asked, but Dillen doesn't have any available at the moment. Can anyone recommend a good alternative supply? I am all too aware of certain 'eBay' belts causing all sorts of issues. So I want to get the next best belts I can.
Thanks
Just a quick update, the door belts are still supplied by B&O, unbeknownst to me! So I've ordered some from a UK suppler