ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi
Happy new year
I have a beolab 2 connect to the eclipse but it does not turn on ?
Its set up in speaker roles /speaker levels but when I come out of the setting and watch tv the sub turns off ?
any idea please
Happy new year,
do you use the speaker Connection?
Sorry my dumping question, only an idea, because the connection board has two rows of connections, one for the PUC connections and Mic, the other for the Beolabs, please make sure, otherwise set up as described in the operating instructions.
CU
Ingo
BeoVision Eclipse 55“ wallmounted, BeoRemote One BT; BeoSound 9000(ex-weiss), BeoLab 9; BeoLab 8000 rot; Beosound 1 grün; BeoPlay H6; Beo4
When I use the speaker roles set up,I can hear the beolab 2 so I am sure they are connect properly.
O. K.
The manual says:
Disconnect all systems from the mains before you connect additional products.
New: Beovision Harmony, Beolab 50's, Beolab 28's, Beolab 18's, Beolab 17's, Beosound Stage & LG, Beosound 2, Beoplay M3, Beoplay A1, Beoplay Portal, Beoplay H4 gen 2, Beoplay E8 3.0
Mikipedia on YouTube: https://www.youtube.com/c/Mikipedia
Mikipedi4 on Twitch: https://www.twitch.tv/mikipedi4
Mikipedia on Intagram: https://www.instagram.com/mikipedi4/
Old: Beosound 9000 mk3, Beolab 3's, Beovision Eclipse, Beolab 1's, Beolab 2, Beovision 10-46, Overture 2300, beolab 8000's, Beolab 4000's, Beovision avant 32" etc. etc.
The Illustration in the manual shows an example of a speaker setup with two front speakers, two daisy-chained rear speakers and a subwoofer.
Can you choose the Beolab 2 in the Setup?
Yes and I can her it
Do you have other speaker Connect to eclipse? Or only tv speaker and beolab 2?