beomaster 7000 speaker 1 or 2 selection

Reply

erandlux Posted: Sat, Feb 20 2021 8:44 PM

rated by 0 users

Hello all B&O vintage fans,

I have reinstalled my beomaster 7000 connected to 2 pairs of passive speakers. 2 beovox 3000 on the wall in room 1 connected to speaker 1 output, and 2 other beovox in the room next-door connected to the speaker 2 output.

Is there a way to select only speaker 1 or only speaker 2 when playing music ? via remote beo4 or master control panel ? 

Default, all the 4 speakers are playing.

Thanks a lot for your help,

best regards

Eric

Reply

Peter replied on Sat, Feb 20 2021 9:02 PM

rated by 0 users

The mute button will mute only speaker 1. However what you clearly need is an X-Tra speaker kit which is a box that attaches via MCL cable to the speaker 2 outputs (you will notice there are 3 pins in each socket) and this will allow remote control of the system in a link room.

This is the box - seems an expensive example though!

https://www.ebay.co.uk/itm/Bang-Olufsen-B-O-MCL-X-TRA-Speaker-Kit/254815758978?hash=item3b5433ea82:g:YasAAOSwwaFf4y6M

Reply

erandlux replied on Sat, Feb 20 2021 9:20 PM

rated by 0 users

Thanks Peter, 

I have this box and the remote panel , but I never succeed to install it. I was hoping there was another simpler solution:-)

Maybee I'll give it another try.

Eric

Reply

erandlux replied on Sat, Feb 20 2021 9:22 PM

rated by 0 users

Thanks A lot Peter,

I have this box and the remote panel, but I never succeed to install it. I was hoping there was another simpler solution.

Thanks anyway

Eric