Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Beolab 18 flashing rapid green

rated by 0 users
This post has 2 Replies | 1 Follower

thorne
Top 500 Contributor
Posts 315
OFFLINE
Bronze Member
Reply
thorne Posted: Fri, Feb 28 2020 10:24 AM
Hi It’s doing this in the off position. Unplugging and plugging back in does no good
Duels
Top 50 Contributor
England
Posts 2,553
OFFLINE
Bronze Member
Reply
Duels replied on Fri, Feb 28 2020 11:20 AM

thorne:

 

Hi It’s doing this in the off position. Unplugging and plugging back in does no good

 

 

If you take a look at the product support pages on the B&O website it explains the meaning of the different lights

 

 

Flashing green means a software update is in progress (and says do Not disconnect from the mains)

 

 

Rapidly flashing green means the speaker is ready to be connected wirelessly to a transmitter.

I suspect you may need to re-pair with the transmitter if you are using one. 

V-Jet
Not Ranked
Posts 1
OFFLINE
Bronze Member
Reply
V-Jet replied on Thu, Jan 20 2022 9:11 PM

I've got 4 Beolab 17's and a 19 and after an update (now multiple!) I cannot get the green lights to stop flashing. I've tried repairing, repudiating unlpugging - everything I can think of.

Anyone have any suggestions?

Page 1 of 1 (3 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly