ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
I have jsut become the proud owner of a Beosound 9000 with it's vertical stand. I am having trouble setting it up. Does anyone have a digital copy of the manual for the setup of the stand and the fitting of the Bosound 9000 to it.
Many thanks
Patrick
Since you're a gold member you'll be able to find all manuals online at Beoworld main site. Under products.
Too long to list....
I have downloaded the manual for the BeoSound 9000 but cannot find one for the vertical stand. I guess no-one has thought to put it with the other manuals - unless of course I am looking in the wrong place!
Look for the SERVICE manuals.
Ralf
Living Room: Beosystem 4, Beolab 7-2 (Center), Beolab 9 (Fronts), Beolab 8000 (Rears), no Subwoofer. Screen: Sony KD-85XH9096Dining Room: Beosound Essence MK II with Beolab 4000 on stands, fed by Amazon Echo Show 8Home Cinema: Beosystem 4, Beolab 7-4 (Center), Beolab 1 (Fronts), Beolab 4000 (Rears). Projector: Sony VPL-HW55Home Office: Beosystem 3, Beolab 7-4, Beolab 5000, Screen: Sony KD-55XH9005 on Beovision 7-40 stand, ML to Beosound 9000 MK3 and Beosound 5/Beomaster 5 (1 TB SSD version)Bedroom: Sony KD-65XH9077, Beosound Essence MK II with Beolab 6002 and Beolab 11 (all white, wall-mounted)
In storage: Beolab 5000/Beomaster 5000 (1960s).
I can see no sign of it there.
Thank you MediaBobNY, I really appreciate it. I was told the Beosound 9000 could be mounted in a high and low position on this stand but it seems not as it does not mention it.
Thanks again
I cannot get the close up panel to work on teh Beosound 9000.As it is connected as option 0 to the Avant as master I wonder whether this cuts it out or is it just broken.
As it is non operational I am also trying to turn random off with the Beo4. I have added it in the list and if I press it the display says 'RANDOM'. According to the manual if I repeat the proceedure and press 'random' twice it should turn it off. This is does not do.
Again any advice appreciated.
Cancel the last post. I just realised that the tabs on the close up panel have to be pushed into the slots in the main unit. This allows the contacts to be made and it now works.
Even though I have owned B&O for a long time, each acquisition seems to bring with it a new set of non intuitive ways of behaving. I guess I should have learnt by now.
However I am grateful that it is working.
paddy2042:I was told the Beosound 9000 could be mounted in a high and low position on this stand but it seems not as it does not mention it.
If I'm not mistaken there are two versions of the floor stand - an older one with shiny base and a 'Mk 2' version with a matte base. On the newer one there are two height positions.