Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Subwoofer connections to Beovision 11

rated by 0 users
This post has 2 Replies | 2 Followers

thorne
Top 500 Contributor
Posts 315
OFFLINE
Bronze Member
thorne Posted: Fri, May 30 2014 11:51 PM

Hi

i stupidly pressed the sound reset button and so lost all my dealer's adjustments.  I really must leave well enough alone!

 

Anyway, for speaker connections, I have managed the central speakers, front left and right and rear left and right, but I cannot locate whiicj PL socket has been used for the subwoofer.  Is this random or is ther one which is always used

 

can't believe I have been so stupid!

Nebelfelsen
Not Ranked
Posts 27
OFFLINE
Bronze Member

It is random...

When configuring the PL sockets in the menu you can hear a sound from each speaker connected to the currently selecte PL socket. Unfortunately the subwoofer sound is very silent. You need a silent environment and your head placed near the subwoofer to hear it.

It might also be a possibility to create a speaker profile where all speakers exept the subwoofer are switched out. an to try the different PC sockets in the configuration menu then one by one. I gues the profile settings need to be updated each time after having changed the PL socket..

thorne
Top 500 Contributor
Posts 315
OFFLINE
Bronze Member
thorne replied on Sat, May 31 2014 8:57 PM

Thanks.  Yes, that was the problem.  I simply couldn't hear the subwoofer.  Ears next to the speaker solved the problem!

Page 1 of 1 (3 items) | RSS