Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

PUC support

rated by 0 users
This post has 4 Replies | 0 Followers

david707
Top 500 Contributor
Posts 146
OFFLINE
Bronze Member
Reply
david707 Posted: Fri, Jul 4 2014 10:16 AM

My dealer installed PUC software for the Humax Fox T2 and Foxsat HDR on my BV8 but did not give me a printed guide to the commands. I have worked out most of them by trial and error but not all. Can these guides be downloaded? The dealer says he can't help because he has now finished with B&O and has "no access to the system".

Thanks for any help,

David.

StUrrock
Top 100 Contributor
Posts 995
OFFLINE
Bronze Member
Reply
StUrrock replied on Fri, Jul 4 2014 4:31 PM

This dealer facebook page seems to have come to your aid;

http://tinyurl.com/qcdynrc

http://tinyurl.com/mjcsvzg

 

 

Millemissen
Top 10 Contributor
Flensborg, Denmark
Posts 14,680
OFFLINE
Gold Member
Reply
Millemissen replied on Fri, Jul 4 2014 9:06 PM

The most common should be showed, when you press 'Menu'.

MM

There is a tv - and there is a BV

david707
Top 500 Contributor
Posts 146
OFFLINE
Bronze Member
Reply
david707 replied on Tue, Jul 8 2014 10:49 AM

StUrrock:

This dealer facebook page seems to have come to your aid;

http://tinyurl.com/qcdynrc

http://tinyurl.com/mjcsvzg

 

 

 

This is exactly what I need and should have been supplied by the dealer. Many thanks for the links!

David

david707
Top 500 Contributor
Posts 146
OFFLINE
Bronze Member
Reply
david707 replied on Tue, Jul 8 2014 10:52 AM

Millemissen:

The most common should be showed, when you press 'Menu'.

MM

 

Yes indeed they are but the "stop" and other commands were evading me. All is clear now.

Thanks, David

Page 1 of 1 (5 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly