Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

Beogram 9500 remote control does not work

rated by 0 users
This post has 3 Replies | 0 Followers

Esko Järvi

Finland

Posts 2

OFFLINE

Esko Järvi Posted: Mon, Sep 28 2015 11:11 AM

rated by 0 users

Hi,

I have been following this forum for a while and finally I have a real question:

I have Beomaster 4500, Beogram 9500 and Beolink 1000. BM 4500 works well with the remote control but BeoGram 9500 does not react to it at all.

While checking the Beograms service manual I noticed that the Data Link control comes with the BeoMasters RIAA amplifier to DIN connectors pin number 7 and without RIAA amplification to the pin 6. Would it work if I simply transfer the Data Link to pin number 7?

Esko

Filed under: Beogram 9500, Beolink 1000

Dave Farr

France

Posts 2,283

OFFLINE

Dave Farr replied on Mon, Sep 28 2015 11:23 AM

rated by 0 users

Hi Esko,

the Datalink should work with the pin in either position 6 or 7 according to past posts. You can transfer the pin and see if it works though. Don't lose the pin. It's easy to do! More often than not, the pins 6 and 7 are either both there are both missing. If you only have 1 pin, try swapping it over.

Welcome to Beoworld by the way.

Dave.