Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Beocenter 7002 metal lid lift system

rated by 0 users
This post has 3 Replies | 0 Followers

John
Top 500 Contributor
Yorkshire England
Posts 104
OFFLINE
Bronze Member
Reply
John Posted: Wed, Mar 11 2015 6:43 PM

I intend swapping the lid lift from an old BC7000 to my BC7002 It just about works in the BC7000 and I intend cleaning it up and adding new Kilopoise 0868G The good BC7002 set is missing all lift parts. Any advice is welcome. 

   John.

John
Top 500 Contributor
Yorkshire England
Posts 104
OFFLINE
Bronze Member
Reply
John replied on Thu, Mar 12 2015 8:29 PM

Has any one repaired one of these?  What problems did you have. How much grease should I use?  Any help advice welcome. Has anyone correct lift parts to sell? 

    John.

      

Dillen
Top 10 Contributor
Copenhagen / Denmark
Posts 13,191
OFFLINE
Founder
Moderator
Reply
Dillen replied on Thu, Mar 12 2015 8:38 PM

Normally a thin streak of grease of each side of the damper plate will do.
What parts are missing?

Martin

John
Top 500 Contributor
Yorkshire England
Posts 104
OFFLINE
Bronze Member
Reply
John replied on Thu, Mar 12 2015 10:18 PM

Hi Martin, The piece that is fixed to the lid is broken and the curved piece is missing.  parts 2021 and 2040 in the Beocenter 7000 manual, I think 2021 has the large hole.   The spring is still there I presume it has not lost any strength.  Please Email me if you have parts to sell.

     Regards, John.

Page 1 of 1 (4 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly