ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
hello,
I have here a Beomaster5 and Beosound5 on my bench.
The unit was not working at all.
Creating a copy with a diskcopy unit like a Sharkoon was not succesfull, but with the Service Tool I was able to make a clone of the entire HDD (clone of only the system drive failed)
Now the unit boot, and comes up with the menu N;music, Nradio, ... with a PC monitor connected to the motherboard DVI
When I connect the PC screen to the Master Unit connection, I will have the correct screen layout.
Navigation from the BS5 works correctly
When I push the 'Standby' button on the back of the display, I get a flash on the BS screen, and for 3 seconds an image.
On the BS mainboard, LED D100 lights up (that's the only one on the board)
Any idea's what may be wrong? The mainboard?
Suggestions where I can find a new/replacement one?
Regards