ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
need to link my beolab 2000 to my bc9500 , the units are next to each other so the controlls on the 2000 won't be used , just need to find an input for the 2 channels coming from the powerlink. Does this sound workable ? surely there's a way on to the amplier of the 2000 without using the masterlink ? has anyone seen or heard of such a cable or know the schematics of the amp? i am quite competant at electronics and dont mind making cables/soldering terminals but am unfamiliar with the masterlink system - any help would be great - cheers
I know you say you'd like a way without using Masterlink but a Beolink Converter should do the job. Take a look here for compatibility of your model. The link is from the BeoTech website and showas all Masterlink compatible products.
If you take a look round that site you will see loads of wiring diagrams etc so you may find what you are looking for.
Stoobie
just had a quick mooch on ebay and found a converter for £28 delivered , i thought for that price i might aswell ! still though , an input for a 3.5mm jack/rca to a link speaker would be handy as you could you a link speaker a a stand alone unit for any source - that is if the amplifier on the link speaker would take it .
You might be able to connect the Beolink Convertor to the BL2000 (stand alone) and get an RCA to powerlink cable and see if that works.
ive got a pl to 3.5mm jack - i'll give it a go when the converter comes - sounds promising
Any updates on this yet? I'm interested in doing the same thing!
Thanks
Any news on this?
No one?