Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Power link

rated by 0 users
This post has 2 Replies | 1 Follower

bramble
Top 200 Contributor
Posts 397
OFFLINE
Bronze Member
Reply
bramble Posted: Fri, Sep 25 2015 8:38 AM
Is there any way to use mk2 powerlink cables to work on beolab 4's .

You get a buzzing from using 2's, problem is ,all existing cables I want to use are in walls / under floors.

I want to avoid running new type 3 powerlink if possible

Thx for any info

Beovision 7 40 mk 5 ,beovision 6x3,   beosound 3000, beogram 3300 , 2 x lc2, 2 x beocom 1401, beocom 6000 x 2,  5 x beo4, 

, 4 x beolab 4's, form 2, h2, a2,a1 and a beolab 2 😀😀

 

 

 

Dave Farr
Top 50 Contributor
France
Posts 2,283
OFFLINE
Gold Member
Reply
Dave Farr replied on Fri, Sep 25 2015 8:54 AM
I'd contact Steve at Sounds Heavenly to see if he has a solution. Maybe a short additional length of shielded cable may help. If anyone knows, he will.

Dave.
BeoMotion
Top 200 Contributor
Posts 384
OFFLINE
Bronze Member
Reply
BeoMotion replied on Fri, Sep 25 2015 8:55 AM

Cut of the connector of your MK2 cable and solder on a short MK3 cable with connector on your existing wires.
You need to connect the blue wire (data ground) to the normal ground, too.
Then most of the buzzing should be gone.

 

Page 1 of 1 (3 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly