ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi,
I am planning to buy an b&o encore ( replace linn ds and linn pre-amp) and connect my tv out (2xrca) to the line in on the encore (3,5mm)
I heard that there is a time delay on the line in. My Loewe tv has a sync (view/sound) possibility of 100 ms plus/min.
I was wondering if this could work. I sold my linn ds already which was connected with my pre-amp so I need advice!
Hope to hear from you guys.
The "solution" is the almando multiplay. But be carefull: It only works correctly when your Loewe has the inbuilt Surround-Module with the Switch Voltage.
I have the Encore too, and a Loewe Xelos without it. So i had always The "PLOPP" at my Labs when i turn on/off thr TV.
And believe me: Thats no solution. So i will/must upgrade to a BV
Greets Sven
BV10-46 - BL8002 - BL 19 - BeoPlay A1 - Beo4 - BeoRemote One - 3x Beotime - Beotalk 1200 - Beocom4 - Beocom 2 (Yellow, Alu) - ATV2 / 4