ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hello,
does anyone know if all gefen hdmi switchers use the same ir compatible codes for B&O's BV7 ?
As I will aquire another BV7 - this time a 32" MK3 - I need another hdmi switcher. It's nearly impossible to get the same gefen hdmi switcher I already have.
There're some around on ebay, but with different specs like Gefen 3x1 Switcher HDMI 1.3 or one named Gefen ToolBox 4 x 1 switcher for HDMI 1.3.
Can I use these too ? I want to connect only 2 HDMI devices to the BV7.
Regards
Martin
BeoSound 9000 MK3, BeoLab 8000, BeoLab 6000, BeoLab 3500, LCS9000, BeoLab 11, BeoLab 7.2, BeoLab 7.1, Beolab 4 PC, BeoCenter 2300, BeoSound Century, BeoSound 8, Beosound 2, BeoVision 7-40 MK2 , BeoVision 7-32 MK3, BeoVision 6-22, BeoVision 4-42, BeoMedia 1, BeoCom 4, BeoLink 1000, BeoLink 5, BeoLink 4 & BeoTime
Living Room: Beosystem 4, Beolab 7-2 (Center), Beolab 9 (Fronts), Beolab 8000 (Rears), no Subwoofer. Screen: Sony KD-85XH9096Dining Room: Beosound Essence MK II with Beolab 4000 on stands, fed by Amazon Echo Show 8Home Cinema: Beosystem 4, Beolab 7-4 (Center), Beolab 1 (Fronts), Beolab 4000 (Rears). Projector: Sony VPL-HW55Home Office: Beosystem 3, Beolab 7-4, Beolab 5000, Screen: Sony KD-55XH9005 on Beovision 7-40 stand, ML to Beosound 9000 MK3 and Beosound 5/Beomaster 5 (1 TB SSD version)Bedroom: Sony KD-65XH9077, Beosound Essence MK II with Beolab 6002 and Beolab 11 (all white, wall-mounted)
In storage: Beolab 5000/Beomaster 5000 (1960s).
Hello Ralf,
I want to connect a DVB-S receiver and an ATV2. None of these got a YPbPr connection, so I must have a converter anyway, so why not a hdmi switcher right from the start ?
As I found out so far, all gefen hdmi switchers which use these remotes will work with the integrated gefen puc of BV7:
So these both older hdmi switchers should work:
Bought both of them on ebay for little money. Will give you definite feedback.