ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
The title says it all...
I bought a Beosystem 4 and cannot get past the pincode Startup Screen, because GO button does not work.
I have an older Version of Beo 4 (DTV/V.MEM/A.MEM), no Back or Play, just Stop and Exit Buttons.The Center of the Joystick should be ENTER (or similar).
What button on my Beo 4 can be used?
Or do I Need to get a Beo 4 NAVI or a Beoremote One?
Ralf
Living Room: Beosystem 4, Beolab 7-2 (Center), Beolab 9 (Fronts), Beolab 8000 (Rears), no Subwoofer. Screen: Sony KD-85XH9096Dining Room: Beosound Essence MK II with Beolab 4000 on stands, fed by Amazon Echo Show 8Home Cinema: Beosystem 4, Beolab 7-4 (Center), Beolab 1 (Fronts), Beolab 4000 (Rears). Projector: Sony VPL-HW55Home Office: Beosystem 3, Beolab 7-4, Beolab 5000, Screen: Sony KD-55XH9005 on Beovision 7-40 stand, ML to Beosound 9000 MK3 and Beosound 5/Beomaster 5 (1 TB SSD version)Bedroom: Sony KD-65XH9077, Beosound Essence MK II with Beolab 6002 and Beolab 11 (all white, wall-mounted)
In storage: Beolab 5000/Beomaster 5000 (1960s).
Try using the PLAY button instead.
Regards
Opman
SELECT is the play button on the Beo4, it is in the middle of the arrow buttons
Ron
kallasr:Unfortunately it does not work...
You were part of another thread with a 7-55 with the same issue, where the solution(most likely) was to get a Navi version, it most likely will not work until you get the Navi Beo4.
/Weebyx
Unfortunately the original poster in that thread never returned to inform us, if any of the suggested solutions had worked ;-(
I'd say - get a Beo4/navi....and remember to set it to Mode1.
MM
There is a tv - and there is a BV