Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

4500 display mounth which 2 sided tape to mounth

rated by 0 users
This post has 2 Replies | 1 Follower

dolle_dries
Not Ranked
Posts 4
OFFLINE
Bronze Member
dolle_dries Posted: Tue, Apr 25 2017 10:34 AM

Displays 4500 system will go loose.. off all the displays 

Which 2 sided tape to use mouth ? 

 

 

GregKo
Not Ranked
NYC
Posts 25
OFFLINE
Gold Member
GregKo replied on Thu, Apr 27 2017 5:02 PM

The absolute best product that I've found and used with much success is servo tape.  It's literally used for mounting servos in remote control vehicles.  Any online or retail hobby shop carries it.  It's much thinner than most double sided tape and is about 10 times as sticky and basically a permanent solution.

 

I used it on a couple of beocenter 9500s that I restored and it works perfectly.

 

Trust me on this one!

 

Greg

Beocenter 9500, Beomaster 6500, Beolab Penta MKII, Beolab 5000, Beolab 3000, Beolab 4000 MKI, Beolab 4000 MKII, Beogram 3300, Beogram 3000, 2X Beolink 7000 RDS, 2X MCP 6500

Johan
Top 200 Contributor
Bolsward, NL
Posts 450
OFFLINE
Gold Member
Johan replied on Thu, Apr 27 2017 7:04 PM

Hi Dolle Dries,

I have used transparant 3M VHB tape successfully for this. VHB stands for Very High Bonding and that's no lie. It is available in various thicknesses and widths. Not cheap though Sad. If you need to do one machine, I could send you a bit I have left.

Regards, Johan

Page 1 of 1 (3 items) | RSS