ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
Hi to all;
i am new here and have a problem with my Beo6 and Beosound 5 Encore.
I use the CT 6.84 on an old Win 98 Laptop (Win 10 doenst work with USB Problem - Read your post about it) and i can upload Firm on Beo6 to 3.40a.
So i put in the indiv Config my: BS5 Encore, the BS9000 and my 4 Beolab 18 and 1 BS 19 Subwoofer (in the two build Zones 1 and 1-1).
The upload shows wrong Configuration on the Beo6 screnne but i have the zones 1 and 1-1 and could use it with the two systems.BS5 and Beo6 uses the wlan and the signal is okay.
The problem is, that on the main screen only the white N.MUSIC is shown (not the red one as read here) and so i could have the album covers and the titles to show/read. Music is via NAS HDD and flac format and shown on the BS5 Encore...
!. Why i could see the covers and titles on my Beo6;what is my mistake?
2. How could i integrate my symsung and Technisat Digit Isio Sat receiver? Find the XML here..
3. What are the Speaker in the config goog for (BeoLab 18 and 19)? Seems to have no effect...
Thank you for your help and sorry for the long description...
Encore and Beo6 cannot show images on remote. Only the full Beomaster 5 is capable of this .
/Jacob
Oh, thanks for your help Jacob =)
Perhaps an idea to integrate my technisat digit SAT Receiver or my Samsung TV?
Got it integrate =) Samsung TV and Technisat works fine. Excellent =)
How about a Yamaha RX AV Receiver; is there a xml for it?