ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
getting frustrated with this so any advice would be welcome.
i have a Beosound 5 connected via Powerlink to a pair of BL8000 mk2. I cannot get the sound settings to display? I need to change the default volume on start up. The BS5 is set to Audio Master option 1. The volume blue line indicates maximum when I move the dial.
The only other connection is Masterlink to a BL3500. All operates ok, I have read that I need Powerlink speakers to display the sound settings so with the BL8000 I should be ok?
I have had this setup from New for about 6 years.
My Beo6 remote has no impact on changing the settings either.
any thoughts appreciated.
Regards.
I rusty on the settings. Will do a bit of homework on this tonight when I have access to the machine. Reply further if I can.
A full blue volume bar suggests you are in option 2 as a audio master to a video master? ??
Check your settings in the maintenance menu (align mode to settings. >> << go). Check roles and options. Option 1, AM master.
Thanks 10% I can confirm unit is set to audio master and option 1. I tried all other options for fun, still no sign of the sound settings and volume indicator shows max. Audio master off is no different.