ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
.
Present: BL90, Core, BL6000, CD7000, Beogram 7000, Essence Remote.
Past: BL1, BL2, BL8000, BS9000, BL5, BC2, BS5, BV5, BV4-50, Beosystem 3, BL3, DVD1, Beoremote 4, Moment.
seethroughyou:Is there any way to adjust the speed at which the cd drawer opens and closes? My CD player has either been serviced or is faltering but the drawer shoots out disturbingly fast. Too fast.
My CD player has either been serviced or is faltering but the drawer shoots out disturbingly fast. Too fast.
Have you checked if the leaf contact that detects open/closed is correct adjusted and has been cleaned and has good contact ? Sometimes if the processor cannot determine the state of the drawer, bad things happen. I have seen this behaviour once :) Fixed by cleaning and adjusting contact.
Without power you can manually open/close the drawer, and gently bend the outer contact pins back into position so the middle reaches the correct.
/Jacob