ARCHIVED FORUM -- March 2012 to February 2022READ ONLY FORUM
This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022
First post - Hello !
The lid on my CDX2 needs manual assistance when opening so I'm assuming it needs a new belt.
I have opened the machine and visually all looks OK. No cogs are damaged.
I have removed the small PCB below the motor assembly frame to allow removal of all screws. I have also removed a clear plastic part which secures the white cog and the spring clip on the cog.
Despite all this, the assembly frame will not lift away and allow fitment of the new belt. The frame can be rocked/ moved but not enough to tease the white cog away from the hinge cog. I'm clearly doing something wrong
Anybody change one of these ? Any help appreciated
Thanks