Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

BeoGram 4000 cartridge carrier.

rated by 0 users
This post has 2 Replies | 0 Followers

kimberley
Not Ranked
Posts 19
OFFLINE
Bronze Member
Reply
kimberley Posted: Sat, Apr 28 2018 11:26 PM

Well, the inevitable has happened and my cartridge carrier has fractured, unfortunately with the 'tongue' firmly inserted into a newly repaired MM20CL which now flaps uselessly on the end of the arm.

I have read here that 3D printed replacement carriers are being made and are effective.

Is anyone in the U.K. offering an installation service for the cartridge carriers? Although I feel I ought to be able to do the work myself, I'm about to move house, so I'm not sure when (or if) I'll have the facilities & time to do so.

Thanks for any advice.

Adam K.

AudioOrigin
Not Ranked
Posts 53
OFFLINE
Bronze Member
Reply
AudioOrigin replied on Mon, Apr 30 2018 2:36 PM

Hello,


If you are near Southampton I can do it for you, and for the broken tab removal from the cartridge heat a pin insert into the old tab and extract 
 
for B&O cartridge/stylus and moving coil cartridge repair look here 
http://www.audio-origin.co.uk/retipping-stylus.html
MMC cartridge repair SP stylus repair
 
Best regards Alistair
kimberley
Not Ranked
Posts 19
OFFLINE
Bronze Member
Reply
kimberley replied on Thu, May 3 2018 12:08 AM

Thank you.

Could you give an idea of the cost, please? Can you supply the 3D printed part, or should I buy one (from BeoLover?) for you to fit?

Hope the M150s arrived O.K., your courier seemed very good.

Adam.

Page 1 of 1 (3 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly