Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

During Random mode, BeoSound 9000 MK II requires 'OK' to play music of next CD.

rated by 0 users
This post has 4 Replies | 3 Followers

siouxnil
Not Ranked
Posts 2
OFFLINE
Bronze Member
Reply
siouxnil Posted: Sat, Aug 13 2016 3:14 AM

Professionally refurbished BeoSound 9000 MK II

Between every CD change during Random mode, the laser will properly move to the next CD, the new CD will begin to spin and display proper (random) track information, but music will not actually play until I physically press 'OK.'  This happens every time and is not intermittent.  Otherwise, everything else seems to be working normally.

Can someone please offer a fix?

Thank you

 

TrevorTron
Not Ranked
Posts 6
OFFLINE
Bronze Member
Reply
TrevorTron replied on Tue, Jun 12 2018 3:23 PM

Hoping someone might have an answer to this too, I also have a 9000 mk II with the same problem.

 

TIA

siouxnil
Not Ranked
Posts 2
OFFLINE
Bronze Member
Reply
siouxnil replied on Tue, Jun 12 2018 3:46 PM

This problem is solved when the headphone jack is occupied.  Try putting an adapter in the headphone jack (as opposed to actual headphones).  

For some reason, certain commands respond differently when the unit “thinks” headphones are in place.

TrevorTron
Not Ranked
Posts 6
OFFLINE
Bronze Member
Reply
TrevorTron replied on Tue, Jun 12 2018 6:14 PM
How very odd... but you are 100% correct!! Thank you so much for the prompt response. Well happy :-)
TrevorTron
Not Ranked
Posts 6
OFFLINE
Bronze Member
Reply
TrevorTron Lets have a Party !!! [co] replied on Tue, Jun 12 2018 6:15 PM

How very odd... but you are 100% correct!! Thank you so much for the prompt response. Well happy  Smile

Page 1 of 1 (5 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly