Sign in   |  Join   |  Help
Untitled Page

ARCHIVED FORUM -- March 2012 to February 2022
READ ONLY FORUM

This is the second Archived Forum which was active between 1st March 2012 and 23rd February 2022

 

Beogram 2200 lid

rated by 0 users
This post has 3 Replies | 0 Followers

DeaconBlue2016
Not Ranked
Posts 78
OFFLINE
Bronze Member
Reply
DeaconBlue2016 Posted: Fri, Jun 29 2018 12:07 PM
IMG_5769.jpg

Hi, does anyone know how to attach these to the lid?

Regards

 

 

Hiort
Top 50 Contributor
Sweden
Posts 2,895
OFFLINE
Bronze Member
Reply
Hiort replied on Fri, Jun 29 2018 1:07 PM
DeaconBlue2016:

Hi, does anyone know how to attach these to the lid?

Regards

The lid and the backside of the Beogram is more or less one unit.

You just unscrew the screws in the back and lid and back part comes off as one piece. Unscrew when the lid is open.

 

 

 

 

Livingroom: BL3, BL11, BV11-46 Kitchen: Beosound 1 GVA, Beocom 2 Bathroom: M3 Homeoffice: M3, Beocom 2  Library: Beosound Emerge, Beocom 6000 Bedroom: M5, Essence remote  Travel: Beoplay E8 2.0, Beoplay EQ, Beoplay Earset

Dillen
Top 10 Contributor
Copenhagen / Denmark
Posts 13,191
OFFLINE
Founder
Moderator
Reply
Dillen replied on Fri, Jun 29 2018 4:42 PM

- The three lower screws - the ones with the square metal brackets.
(The other three takes it all apart with a springy sensation...).. 

Martin

DeaconBlue2016
Not Ranked
Posts 78
OFFLINE
Bronze Member
Reply
DeaconBlue2016 replied on Fri, Jun 29 2018 5:42 PM

I've managed to assemble the lid and it's fastened on to the main body, but without the long rod and the three right angles. I do have photos of those two items, but unable to upload them.

I know the above parts should be connected to the lid _ Someone kindly sent me a link to a diagram - but just unable to get all parts linked. Hmm

Page 1 of 1 (4 items) | RSS
Need a cable? Just ask Steve at Sounds Heavenly
Sellong your B&O
Need a cable? Just ask Steve at Sounds Heavenly